#info
0,8=1>This is the current version number of 'Print Spooler'
1=1>This icon signifies that interactive help is available from this program
2,3=1>This is the name of this program
4,5=1>This is the purpose of this program
6,7=1>This is the author of this program
#queue
0,1=1>Queue window - Click on any items shown for queue manipulation menus.
2=1>!OPT!All printing will stop if '<IT>' is selected.
3=1>!OPT!Printing will stop after the current print completes if '<IT>' is selected.
4,1=1>Connection shows which device print will be directed to e.g. Parallel, USB etc.
5=1>Connection type for currently selected print device in Printers.
6=1>Connection type for device PrintSpool is attempting to print to.
7=1>Printing devices and the current response status.
8=1>The currently selected printer in Printers.
9=1>Indicates status shown is for the currently selected printer.
10=1>Status of either the currently printing device or the current printer.
11=1>Indicates status shown is for the current printing device.
12=1>The device PrintSpool is attempting to print to.
13,14=1>This shows the printing progress.
15=4>Set the default number of copies for subsequent prints.
19=1>View/hide the icon bar icon.
20=1>Closes the queue window.
#config
0=1>Configuration options.
1=1>Restore default configuration.
2=1><IT> the saved configuration
3=1>Save the current configuration settings.
4=1>Display global configuration settings.
5=1>Display local configuration settings for the current printer PDF.
6=1>Display local configuration settings for the current USB printer.
7=1>Display configuration Help.
8=1>Leave the configuration settings unaltered.
9=1>Set the configuration values without saving and close the window.
#confpanel
0=2>Configuration panel
2=2>Configuration panel - global settings.
4=1>Automatic regulation of buffer size, buffers per poll and centisecond pause.
5=4>Set buffer size (USB and non-local print to file only) ,larger size speeds up printing.
9=4>Set buffers per poll, larger numbers may decrease desktop response.
13=4>Set centiseconds between polls, smaller numbers may decrease desktop response.
17=1>!OPT!Closes and reopens print file after each transfer of print.
18=1>!RAD!Ignore printer status.
19=1>!RAD!Only check for Online/Offline status.
20=1>!RAD!Check all status returns e.g. Online/Offline/Paper error.
21=1>!OPT!Ignore the first status returned for the first print.
22=1>!OPT!Perform USB printer bus soft reset between prints.
23=1>!OPT!Automatically generate an additional pause before performing the soft reset.
24=4>Time to pause before applying reset, longer time prevents any print being lost.
28=1>!OPT!Flush buffer when stopping a print.
29=1>!OPT!Perform USB printer bus soft reset when stopping a print prior to closing the file.
30=1>!OPT!Perform USB printer bus soft reset when stopping a print after closing the file.
31=4>Pause after sending print to allow printer ink to settle or time to process print.
35=1>!OPT!Only use the global configuration settings.
36=1>!RAD!Handle all printer types that PrintSpool knows about (excludes 'ToFile' unless configured).
37=1>!RAD!Handle all printers except 'Shared' ones (excludes 'ToFile' unless configured).
38=1>!RAD!Only handle Shared printers. Linked printers will also be handled.
39=1>!OPT!Create shared and linked prints locally before transferring to networked PrintSpool.
40=1>!OPT!Handle 'Print to file' connections as well.
41=1>!OPT!Warn if overwriting existing file.
42=1>!OPT!Attempt to close any files open to the print destination.
43=1>!RAD!Print to the currently selected Printers device.
44=1>!RAD!Match print to original printer.
45=1>!RAD!Extended printer matching - this option interacts with Printers.
46=1>!OPT!Default setting for icon bar icon.
47=1>!OPT!Expand title area in queue display (removes date & time of print)
48=1>!OPT!Retains last printed item for requeueing between sessions.
49=1>!OPT!Enables simultaneous printing to local devices.
50=1>!OPT!Enables simultaneous printing to remote devices.
51=1>!OPT!Prevent other applications using parallel port while printing.
52=1>!OPT!Only attempt to print to networked printers if responding.
53=1>!OPT!Only check network status if prints queued.
54=1>!OPT!Copy prints to RemotePrinterFS
55=1>!OPT!Automatically run PrintSpool when Printers loads and quit when Printers quits.
56=1>!OPT!Don't monitor anything unless a printer is available.
57=1>!OPT!Log main print commands.
58=2>User selectable command for retrieving the queue window when no icon bar icon is present.

#reportsnest
#overwrite
0,6,7,8,9,10,11=1>Overwrite warning
1=2>Printing device
3=3>File destination that is in danger of being overwritten.
12=1>Quiet : Allow overwriting until destination or connection changes.|MBack :Return to overwrite screen
13=1>Change the leaf name of the save destination.
14=1>Overwrite : Replace existing print with this one, once only.|MAccept name : Use the entered leaf name as the new print destination
#status
0=2>Printer
2=2>Rotate through known printers.
4=2>Device response status.
6=1>Click on this mini text icon for further status information.
7=1>Silence the 'Overwrite' warning for this device.
8=2>Identifies 'Prelude' file.
10=2>Indentifies 'Trailer' file.
12=3>Configuration settings.

#conflocal
0=2>Configuration panel
2=6>Local settings PDF/USB identification.
8=1>!OPT!Handle this printer.
9=1>!OPT!Link the printer to a corresponding printer on the ShareFS disc machine.
10=1>Link the printer to a corresponding printer on the ShareFS disc machine.
11=2>Network information
13=2>Host name or dotted quad address (LPR & network monitoring)
15=2>Port number (Network monitoring)
17=2>Queue identifier (LPR only)
19=1>!OPT!Set Control/Print order
20=1>!OPT!Tolerate server error after print transferred
21=1>!RAD!Standard !Printers connection
22=1>!RAD!Interface to LPR (Requires Host/Queue settings)
23=1>!RAD!Send to ROOL or Castle USB interface without using Pop-up Printers
24=1>Current USB connection information
25=1>!POP!USB printer selector - printer must be switched on to appear
26=1>!RAD!Use command 
27=2>Memory requirement of task
29=1>Command to use substituting {H}=Host, {P}=Port, {F}=Filename
30=1>Automatic regulation of buffer size, buffers per poll and centisecond pause.
31=4>Set buffer size (USB and non-local print to file only) ,larger size speeds up printing.
35=4>Set buffers per poll, larger numbers may decrease desktop response.
39=4>Set centiseconds between polls, smaller numbers may decrease desktop response.
43=1>!OPT!Closes and reopens print file after each transfer of print.
44=1>!RAD!Ignore printer status.
45=1>!RAD!Only check for Online/Offline status.
46=1>!RAD!Check all status returns e.g. Online/Offline/Paper error.
47=1>!OPT!Ignore the first status returned for the first print.
48=1>!OPT!If ticked global bus reset settings apply.
49=1>!OPT!Reset printer bus between prints.
50=1>!OPT!Automatically generate an additional pause before performing the soft reset.
51=4>Time to pause before applying reset, longer time prevents any print being lost.
55=1>!OPT!Reset when stopping a print (Pre-Close).
56=1>!OPT!Reset when stopping a print (Post-Close).
57=1>!RAD!Global flush option applies.
58=1>!RAD!Flush buffer when stopping a print.
59=1>!RAD!Don't flush buffer when stopping a print.
60=1>!OPT!Force postscript termination when completing print.
61=1>!OPT!Create a graphic representation of text printed by other applications.
62=4>Pause after sending print to allow printer ink to settle or time to process print.

#monitor
0=2>Current printing action.
2=2>Current printing device.
4=2>Configuration settings in use.
6=2>Buffer size settings in use.
8=2>Buffers per poll settings in use.
10=2>Centisecond pause settings in use.
12=2>Buffer loop count for current poll.
14=2>Amount of data being transferred.
16=2>Bus reset settings being applied.
18=2>Flush settings being applied.

#store
0=2>Current print title
2=1>!OPT!Enable title name to be altered
3=1>Revert new title to current title
4=1>New print title
5=1>Change print title
6=1>Copy print to store but leave in queue too
7=1>Don't change anything
8=1>Move print to storage area

#archive
0=2>Stored prints belonging to this printer
2=1>Select printer
3=1>Page number
4=1>Move to previous page
5=1>Move to next page

#textoptions
0=1>!RAD!Leave 'text' printing by applications unchanged
1=1>!RAD!Handle 'text' printing by applications where the normal printer driver cannot
2=1>!RAD!Handle 'text' printing by applications for all printer drivers
3=1>!OPT!Create a graphic print for text files dragged to PrintSpool.
4=2>Number of lines to print on an A4 page.
6=2>Number of characters to print on an A4 line.
8=2>Filetypes that require text printing.
10=42>Required text filetypes are configured here by text entry of filetype name/filetype or by dragging files to the writeable icons.
52=1>Click here to view 'Help' for text printing.
53=1>Abandon changes to text printing.
54=1>Activate the current text printing setup.
